Fairing bolts

Home › Forums › CB1100R Owners Club Forum › Fairing bolts

  • This topic is empty.
Viewing 15 posts - 46 through 60 (of 100 total)
1 2 3 4 5 6 7
  • Author
    Posts
  • August 30, 2012 at 6:40 am #10814
    Nat_P
    Member

    Hi Andy,

    No its not too late . I will call Phil today to make sure the bolts have arrived and will ask for a final show of hands before going ahead. I think its only right to tell people exactly how much this is going to cost before ordering.

    Regards,

    Nat.

    August 30, 2012 at 9:52 am #10815
    Nat_P
    Member

    Bolts received by Phil.

    Awaiting response now.

    Will post as soon as……………….

    Regards,
    Nat.

    September 6, 2012 at 9:58 pm #10834
    Trevor Hughes
    Keymaster

    Nat

    Do you have any new yet?

    September 7, 2012 at 9:25 am #10835
    Nat_P
    Member

    Hi,

    No…………….not yet.

    sorry.

    September 8, 2012 at 10:49 am #10837
    TerryC
    Member

    Hi Nat

    How much for a set of 6 bolts for RB sent to Australia?
    regards
    Terry

    September 11, 2012 at 8:41 am #10842
    Nat_P
    Member

    Hi Terry,

    Give me an address / post code and I will get you a price.
    Shouldnt be too much, 6 bolts.

    Nat.

    September 12, 2012 at 11:39 am #10848
    DavidB
    Member

    ALso to Canada

    David Booth
    49 English Ivyway
    Toronto, Ontario
    M2H 3M3
    Canada

    1982 RC two sets if there’s enough

    September 13, 2012 at 8:44 am #10851
    Nat_P
    Member

    Hi Chaps,

    I had a quick look on Interparcel…………… A package of 1kg ( thats the lowest weight on their site ) 4cm X 3cm X 2cm ……….
    Comes to roughly CAD 40 to Canada and Aud 46 to down under. ( £25 & £30 respectively ).
    Obviously bolts will weigh less than 1 kg and I recon normal post will be cheaper than that, but I need the exact weight.
    At least this gives you a rough idea of your worst case scenario.
    I recon normal post will be half that price, but thats an utter guess on my part .

    Regards,

    Nat

    September 14, 2012 at 12:51 pm #10856
    DavidB
    Member

    Nat

    whatever it takes

    David

    PS youcould just put them in a padded envelope. It’s a lot cheaper

    September 15, 2012 at 8:32 pm #10857
    Nat_P
    Member

    Hi David,

    Thats what I meant by ” normal post “. I would send them registered post so at least if they get lost it covers a replacement set.

    For everyone else, I have phoned Phil Denton this week , but never got to speak to him, I did leave him a message, but he didn’t call me back.
    I will try again on monday .

    Regards,
    Nat.

    September 16, 2012 at 11:36 am #10859
    TerryC
    Member

    Hi Nat
    Bilbie Place
    Fletcher NSW 2287
    Australia
    Terry

    September 19, 2012 at 11:19 am #10924
    Anonymous
    Inactive

    Any update from Phil so far Nat ?

    September 24, 2012 at 9:19 am #10948
    Nat_P
    Member

    Hi,

    No update yet. Have called him, he tells me he is on the case.
    Not exactly rushing though is he .

    As soon as I hear fom him will post on here.

    Sorry
    Regards,

    Nat.

    October 4, 2012 at 10:07 am #10997
    Nat_P
    Member

    Hi,

    I havent forgotten. Called him again this morning, he had been madly busy and assured me its imminent.

    Fingers crossed.

    Regards,

    Nat.

    October 4, 2012 at 8:40 pm #10998
    Trevor Hughes
    Keymaster

    Hi Nat

    Phil is always at Stafford so I can speak to him there if you want.

    Trev

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 100 total)
1 2 3 4 5 6 7
  • You must be logged in to reply to this topic.